lift on order, need cam bolts...

[jollyman78]

So, I ordered my Daystar lift last week; it should be here the 16th!

However, I later realized that I need a set of cam bolts for my LCA's. Calmini makes a set... Anyone know a shop around here that may carry them so I don't have to order 'em?

I have an '06 Xterra off-road.

[earth1]

AAA Metric (http://www.aaametric.com/)

May have them, if you can take a sample or know the size/pitch...

Edit:
Uh... I just realized you need spindles right, I was thinking of something else.

[Nissanclay]

Will UCA cam bolts from a 2003 nissan frontier work? I have some for ya if they will. But its probably a long shot.

[jollyman78]

AAA Metric (http://www.aaametric.com/)

May have them, if you can take a sample or know the size/pitch...

Edit:
Uh... I just realized you need spindles right, I was thinking of something else.

The cam bolts are special, so I'm not sure they would have them...

Will UCA cam bolts from a 2003 nissan frontier work? I have some for ya if they will. But its probably a long shot.

I'm not sure if the gen1's will work. I'm in need of the cam bolts for the LCA.

I called Boulder Nissan yesterday and they didn't seam to know what I was talking about... I'm going to give the 4-wheel place in Longmont (can't remember their name) a call and see if they have them. My lift comes in the 16th.

T-minus 3 days to get my shit together!

[Robust57]

got mine from http://yournissanparts.com/catalog.aspx?storename=nissanofturnersville&DeptID=191676&ItemID=9930027&detail=1

[Neight]

I'm going to give the 4-wheel place in Longmont (can't remember their name) a call and see if they have them.

If you're talking about All Phase, they don't. But they are located right next to a Fastenal.

T-minus 3 days to get my shit together!

I take it my post is useless, since it's now been 7 days....

[jollyman78]

All Phase was able to get them for me. I now have all the parts, all the tools, and am going to do my lift at a buddy from work's house tomorrow!

[jollyman78]

woo hoo! the lift is done!

I took it to the shop for alignment, without puttin gon the bolts, and they said they would do 'em if needed... they said they alligned it w/o the cam bolts! Granted, this was only half way into the job; I only had the front spacers on.
They said I should have it checked after doing the rear.

I got the liftetime alignment, so I may put them on next weekend and have it done again.

[jollyman78]

Questions posted over on thenewx.org:
http://thenewx.org/phpbb2/viewtopic.php?p=73137#73137

[Packman5280]

once the rear is higher, the front will sit different, so it's always a better idea to get an alignment when you mess with the suspension. and since it's free, why not?