Snorkel W/ Fiberglass Fender

[Racer Xterra]

Looking at the yellow frontier on the page banner and wanted to know if that snorkel is mounted to a fiberglass fender. Any info would be appreciated.

Thanks!

Racer Xterra
HTWT

[Nissanclay]

Thats Bogof's frontier, send him a PM or I'm sure he will see this a post up. He posted close up pic somewhere a little while ago.

[soccerbrace]

I forget who makes the snorkel, I believe it is Safari, and I think that is made by ARB. He actually cut a hole in his fiberglass fender, and routed the entire snorkel inside the fender. Looks really slick in person. Jarrod did the work himself if I am not mistaken.

[bogof]

Yup thats me. I have some close up pics of it, but I will have to post it later tonight. Basically you will have to modify a ARB Safari Snorkel to fit. You have to trim the piece that goes to the air intake about an inch so the snorkel fits under the flare. The toughest part is cutting the hole for the snorkel to go through the flare. I just cut a basic shape I knew was to small with an angle grinder and finished trimming with a dremel tool. It takes some ingenuity but the end results were worth it to me. I think there is only one other Frontier/Xterra with this setup in Florida.

Heres some pics
http://memimage.cardomain.net/member_images/8/web/656000-656999/656597_34_full.jpg

http://i104.photobucket.com/albums/m193/bogof777/My%20truck/IMGP2752.jpg

http://i104.photobucket.com/albums/m193/bogof777/My%20truck/IMG_0388.jpg

http://i104.photobucket.com/albums/m193/bogof777/My%20truck/IMG_0386.jpg

[Racer Xterra]

Thanks Folks!

Bogof - Looks great, thanks for the info.

Racer Xterra
HTWT