Wheelin? Whats that?

[max_stryker]

Hey there. Some of you might know me from many of the other millions of boards i never frequent anymore but Im Stryker. I drive a fairly modded r25 and i beat the living hell out of it when it runs...

What I do:
i work at a fruit stand and plow. I also break stuff and make stuff. I have no life really. I also work in a small button factory; we are expanding and Im going to be getting a administrative position in the new building that doesnt exist yet. I also own a chop shop on the side.


I have a couple of mods: 31s on black steelies, 2" AC lift 4.5" Prado Lift, 35s to come, lincoln locked rear, snorkel, doorless, cb, front and rear bumpers, manual hubs, extended ss brake lines, custom exhaust, mud interior with bedliner underneath, black panther skids, hi lift STOCK tire carrier, ac tcase gears, cf clutch

Heres a couple pics:

http://photos-831.ak.facebook.com/ip002/v48/202/96/194902475/n194902475_30118831_6734.jpg

right now its a work in progress
http://photos-253.ak.facebook.com/ip002/v58/202/96/194902475/n194902475_30153253_5795.jpg

i think thats about it for an introduction.

[Ryan Gee]

Hey Max! Welcome to Colorado!!

[ChefTyler]

Hio :wave:

[Packman5280]

What I do:
i work at a fruit stand and plow. I also break stuff and make stuff. I have no life really. I also work in a small button factory; we are expanding and Im going to be getting a administrative position in the new building that doesnt exist yet. I also own a chop shop on the side.


:roflmao:

Welcome.

[JayRyan]

What I do:
...I also own a chop shop on the side.

I'm gonna shoot a list of parts I need :D

[max_stryker]

Hey man, if your serious ill go track stuff down haha.

Thanks for the welcomes guys.

[JayRyan]

Hey man, if your serious ill go track stuff down haha.

Thanks for the welcomes guys.

lol!! :roflmao:
I couldn't do that in good conscience if I knew the source of the parts was unknown. :D

Suddenly there's posts by Kevin 'cause he's had parts stolen LOL!

[Alpine Spirit]

lol!! :roflmao:


Suddenly there's posts by Kevin 'cause he's had parts stolen LOL!

HEY WHAT THE HELLL ... Everything from the Tcase out is gone :cool: :cool: :crazy:

[NissanNut]

Whats the plans for the R50? Why no front end?

[Ryan Gee]

Max gets a little out of control with the sawsall.....

[MaxdaSwede]

my names max... we cant have 2 maxs in this club....:crazy:
welcome to the club
Max

[max_stryker]

come on now ryan thats not true...i only went crazy on the red truck ith the sawzall.

i dont really own a chop shop, i just buy lots and lots of pathfinders. so if you really do need parts, i can get them legit haha. i am also in jersey so im sure if kevin has parts stolen...it wasnt me


nissannut - the current plans for the r50 as follows:
4.5" Prado Lift Kit which include a front subframe drop. I can post pics of that if youre interested.
warn manual hubs
stainless steel braided exended lines
rear dodge coils (just got the new perches today)
im trying to sell my rims to get new ones for the 35s

theres no front end on it because i just took that bumper off to work on the lift and i broke the clips on the grille so it came out. yada yada.

i think thats all the mods as of right now that im currently working on but i also needed to fix it so i got my waterpump pulley from nissie today for $55!!!!!! and i got the correct steering parts for the big ass lift (which is getting stacked with the ac lift.

edit: and to max: yeah man....rock on we probably have the coolest name out there, no lie. but you can have it. most guys just call me stryker

[Ryan Gee]

Ok... he goes nuts only on Red Pathfinders! :eek:

[zonianbrat]

good to see you max.

For those of you who do not know max, he is the biggest post-whore ive ever seen!!!

[ChefTyler]

No way Max is more of a post whore than JR!

:wave: Max!

[Alpine Spirit]

Ditto on that one. :type: JR post threads like "Look Post Whore" and we ask him why then he responds to each post with 2 posts to answer. :type: Then later he will rethink his answers and post some nondescript reference to Koreans just to confuse you and make you post more so he can post more.

:laughing: :peace:

[max_stryker]

tricky little bastard isnt he...

[ChefTyler]

That is dead on, Kev :D

[max_stryker]

and im not the biggest post whore youve ever seen...when you run your own board or you get to be an admin on one. youll knwo that making rules posts and directions on how to post pics, or check the merchandise type stuff increases yuour post count by a lot.

[Lance T]

...4.5" Prado Lift Kit which include a front subframe drop. I can post pics of that if youre interested.

Yes, and welcome.

[max_stryker]

im just gonna post a few links to where pics can be found instead of copy and pate like 9 million different links.


Install of the Prado Lift link
http://pradolifts.com/forum/viewtopic.php?t=156


General Pic's Link
http://pradolifts.com/forum/viewforum.php?f=1
any post made by me has pics of the r50

oh i also own a few wd 21s as part o the glorious pathy family.

recent activity
http://pradolifts.com/forum/viewtopic.php?t=128

enjoy guys

[Packman5280]

nice CV boot...

[NissanNut]

Wow nice looking lift. Looks allot different than the original.;)

[max_stryker]

yeah u know what packman...i was poor when i did that and it worked out for a while. but now i got new ones...so im exctied about that install.

nissannut - whats alot different than the original?

[NissanNut]

I wheel with Keith (SystemF). Isnt this kit based on his design?

This one looks real nicely cut.

[max_stryker]

yes its based on his design. but this kit is really on a different level. keiths was definately the original and the inspiration for this but it has since been beefed up like no ones business LOL

[NissanNut]

yes its based on his design. but this kit is really on a different level. keiths was definately the original and the inspiration for this but it has since been beefed up like no ones business LOL

From the few pix I have seen of this "prado lift" its looks very nice. Keiths has been trouble free on the trail. Its a simple design. I was seriously thinking of copying it years ago.

[max_stryker]

lol@that

heres a couple new pics.
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/new%20pics/newpics072.jpg
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/new%20pics/newpics076.jpg

hottest mod ever
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/new%20pics/newpics087.jpg
duct tape is for inspections only as you cant have sharp edges anywhere
LOL

and for all those who havnt seen the wd pics

http://i44.photobucket.com/albums/f23/max_stryker01/4X4/swamped/swamped018.jpg
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/swamped/swamped013.jpg
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/swamped/swamped012.jpg
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/swamped/swamped011.jpg
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/swamped/swamped010.jpg
http://i44.photobucket.com/albums/f23/max_stryker01/4X4/swamped/swamped007.jpg