Wanted H233b lsd centre

[dr frankenstine]

Hi hope you fellas can help me out with a LSD Centre only, no crownwheel, pinion or carrier. Good but cheap because of postage to Tasmania, Australia

Please E-mail Peter on mknissan@bigpond.com

[Ryan Gee]

31 or 33 spline? Those years of 233's are 31 here.

[ChefTyler]

I have a 33 spline LSD that I could take apart for you :D

[dr frankenstine]

31 or 33 spline? Those years of 233's are 31 here.thanks for the reply. It needs to be a 31 spline

[dr frankenstine]

I have a 33 spline LSD that I could take apart for you :DThanks but it needs to be a 31 spline

[Packman5280]

so what do you actually need? just the two case halves? spider gears, side gears, and disks? i have lots of parts, but I have donated some of them away and I'm not sure what exactly you need. and I don't know what a crown wheel is (maybe ring gear?).

[dr frankenstine]

so what do you actually need? just the two case halves? spider gears, side gears, and disks? i have lots of parts, but I have donated some of them away and I'm not sure what exactly you need. and I don't know what a crown wheel is (maybe ring gear?).yep correct ring gear is crownwheel. i need everything in the centre but the ring gear and bearings removed. Just the hemisphere complete. Like what you get in an ARB diff lock kit except instead of the locker its a LSD. so the part you remove to put in the locker. Must be LSD though not open

[ChefTyler]

Feel like upgrading to 33 spline? :D

[dr frankenstine]

Thanks but no I deffinatelly don't want to have to change axles etc. I hope to be able to get a little extra traction cheap. Otherwise ill just get an ARB air locker for the front. The GQ patrol has a h233b centre in the front. The Frontier 6 cyl, x terra, navara,pathfinder, titan and teranoII have h233b diffs in the rear so here's hoping someone will have a LSD one somewhere.

[Packman5280]

lemme go check. it may be still in the axle, under the snow, but I should have one somewhere. worst case, i'll be putting a lockright in in a month or so, I can send you my LSD then. currently i have an extra disk in each side, making it really tight, basically a spool, but you could always undo that.

[ChefTyler]

The H233b from the Xterra and Frontier (from 99 up I wanna say) are all 33 spline variants. But an older Pathy rear would work very well...I'll keep my eyes peeled @ the yards providing that the weather ever warms up.

[dr frankenstine]

lemme go check. it may be still in the axle, under the snow, but I should have one somewhere. worst case, i'll be putting a lockright in in a month or so, I can send you my LSD then. currently i have an extra disk in each side, making it really tight, basically a spool, but you could always undo that.That will be cool thanks

[Bill Potter]

Are you still looking? I have one from a 92 out now.

[aaronet]

I have a 33 spline LSD that I could take apart for you :D

Is this a complete 3rd member? What ratio? I need a 4.9

[Packman5280]

sorry dr, all my LSD carriers are not usable, they have been cannibalized for parts. sorry for the late follow up.

[Bill Potter]

it's a 31 spline 4.37 LSD out of a 92HB

[ChefTyler]

Is this a complete 3rd member? What ratio? I need a 4.9

It is just the LSD and carrier, no R&P, not a complete 3rd member. Sorry.

[Bill Potter]

Tyler,

I think you are confused...I have a complete 3rd member....31 spline, LSD, 4.37...I'm trying to get rid of.

I'm not looking i'm selling.

[aaronet]

sorry dr, all my LSD carriers are not usable, they have been cannibalized for parts. sorry for the late follow up.

Do you have the ring and pinion from a 4.9 ? Are the ring bolts 12mm?

[ChefTyler]

Tyler,

I think you are confused...I have a complete 3rd member....31 spline, LSD, 4.37...I'm trying to get rid of.

I'm not looking i'm selling.

Nope, not confused :D
He was asking me about my 33 spline LSD for sale :D

[Packman5280]

yes, they are in use in my truck at the moment.:fingerpop:

sorry, don't now what size the bolts were, but my packed 31 spline LSD carrier is in there too, so i know they fit if that's what you're asking.

Do you have the ring and pinion from a 4.9 ? Are the ring bolts 12mm?

[aaronet]

yes, they are in use in my truck at the moment.:fingerpop:

sorry, don't now what size the bolts were, but my packed 31 spline LSD carrier is in there too, so i know they fit if that's what you're asking.

OK Good, now I know what to do. I can use my h233b carrier with the 4.9 gears. Now where can I get some nice used 4.9 gears? I need to get the LockRite as well.

Thanks for the help.

[Packman5280]

just keep searching. i found mine on ebay for $8, but don't expect that kind of a deal. you can try car-part.com, but they will charge you a ton and may not even get you the right part the first time, and you'll have to deal with shipping too. I got really lucky, just keep your eyes open and you'll find something.

or just order 4.9's from nismo.

[aaronet]

just keep searching. i found mine on ebay for $8, but don't expect that kind of a deal. you can try car-part.com, but they will charge you a ton and may not even get you the right part the first time, and you'll have to deal with shipping too. I got really lucky, just keep your eyes open and you'll find something.

or just order 4.9's from nismo.

What is the website for NISMO ?

[Packman5280]

don't know if they have one, but nismo is basically your dealer, you buy nismo parts through the nissan dealer as far as I know. go to www.nissan4wheelers.com and click the banner ad to ABC nissan, they have the best prices i have seen on nissan parts.

or just order them from AC.