PDA

View Full Version : my 95 pathy progress

JBDevega
05-06-2009, 09:53 PM
http://i599.photobucket.com/albums/tt78/Zerocide/stock2.jpg
Pathy when i first bought it stock.

http://i599.photobucket.com/albums/tt78/Zerocide/Photo_041409_004.jpg
After adding 31 on steel black rims, arb bull bar, cb, IA brace
http://i599.photobucket.com/albums/tt78/Zerocide/Photo_042809_001.jpg
http://i599.photobucket.com/albums/tt78/Zerocide/Photo_042809_002.jpg
and current after 32 on 4-spoke charcol Xterra rims, manual hubs, 3" lift, steeing stablizer, and 9k winch added
Sully4x4
05-06-2009, 10:07 PM
Looks good man.
tbecktold
05-07-2009, 12:33 AM
Looks great. How big a spacer are you running?
Alex Topousis
05-07-2009, 12:41 AM
Fixed all your links so they show up automatically. Choose the "img code" and copy it while you are in photobucket and paste it how the link is to get the pictures to show on the forum
JeffW
05-07-2009, 07:48 AM
Awesome!
JBDevega
05-07-2009, 04:20 PM
Looks great. How big a spacer are you running?

Im running 2" spacers but im pretty sure i could get away with 1.25" just was not 100% untill after i saw how much room was between my rims and control arms after the 2" installed.

Fixed all your links so they show up automatically. Choose the "img code" and copy it while you are in photobucket and paste it how the link is to get the pictures to show on the forum

thanks, didnt know that.
Pathspector
05-07-2009, 10:00 PM
Looks great..... What brand and width are your 32's?

Terry
JeffW
05-07-2009, 10:03 PM
Looks great..... What brand and width are your 32's?

Terry

Kelly 10.5"
Sully4x4
05-07-2009, 10:30 PM
Aren't 32's usually 11.50 though?
JeffW
05-09-2009, 09:41 AM
Aren't 32's usually 11.50 though?

For 16s they run on p-metric sizes. The closest to an 11.5" width is a 285. 285/72/16s are about 33" and require trimming. These ones are 265/75/16s and run the same height as the average 32x11.50r15.

EDIT:

Jon, how are those wide spacers working out? Any rubbing when you turn?

.
Sully4x4
05-09-2009, 05:21 PM
Oh my bad. I didn't know they were 16's.
JBDevega
05-09-2009, 07:24 PM
For 16s they run on p-metric sizes. The closest to an 11.5" width is a 285. 285/72/16s are about 33" and require trimming. These ones are 265/75/16s and run the same height as the average 32x11.50r15.

EDIT:

Jon, how are those wide spacers working out? Any rubbing when you turn?

.
only have rubbing on my passanger side front fender...i think its cause that fender is messed up.
Ghettoguy4x4
05-09-2009, 09:59 PM
Very nice Pathy, if you don't mind where and how much did you get the arb bull bar for?